1. packing method [1] d = reel diameter; w = tape width. sot96-1 tape reel smd; standard pro duct orientation 12nc ending 115 rev. 1 ? 23 november 2012 packing information so8 fig 1. reel pack for smd table 1. packing information package version 12nc ending reel dimensions d x w (mm) [1] spq/pq (pcs) reels per box outer box dimensions l x w x h (mm) sot96-1 115 180 x 12 1000 1 190 x 190 x 26 cover tape circular sprocket holes opposite the label side of reel carrier tape msc074 qa seal tape reel barcode label barcode label printed plano box
sot96-1_115 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. packing information rev. 1 ? 23 november 2012 2 of 3 nxp semiconductors sot96-1 tape reel smd; standard product orientation 12nc ending 115 2. product orientation fig 2. product orientation in carrier tape sot89 sot223 mgu986 sot404, 426, 427, 428 sot409 pin 1 sot96, 163, 530 pin 1 sot391 sot538a sot596a sot559a, 632a, 649a circular circular sot482b/c sot669, 1023 direction of feed direction of feed
nxp semiconductors sot96-1 tape reel smd; standard product orientation 12nc ending 115 ? nxp b.v. 2012. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please se nd an email to: salesaddresses@nxp.com date of release: 23 november 2012 document identifier: sot96-1_115 limited warranty and liability information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such info rmation and shall have no liability for the consequences of use of such information. 3. carrier tape dimensions fig 3. carrier tape dimensions table 2. carrier tape dimensions in accordance with iec 60286-3. a 0 (mm) b 0 (mm) k 0 (mm) t (mm) p 1 (mm) w (mm) 6.7 5.4 1.8 - 8.0 12 k 0 mdb579 a 0 4 p 1 b 0 w direction of feed
|
